Plasma Cutter Tips And Electrodes 120793, Hypertherm Tips, Hypertherm Electrodes
 
Shanghai ZhouBo Welding & Cutting Technology company can supply Hyperherm plasma cutter nozzle 120934, plasma cutting nozzle 120935 CCW, 300A nozzle 120794, 300A CCW nozzle 120795, 200A nozzle 120787, 200A CCW nozzle 120788, 100A nozzle 120777, 100A CCW nozzle 120778, hyperherm electrode 120810, plasma cutter tips 120802, 200A electrode 120793, 100A electrode 120785, hyperherm HT4400 400A swirl ring 120939, 400A CCW swirl ring 120940, 300A swirl ring 120913, 300A CCW swirl ring 120914, 200A swirl ring 120791, 200A CCW swirl ring 120792, plasma cutter water tube 120025. plasma retaining cap 120786, Hypertherm plasma Cutting machine HT4400 accessories, plasma consumables. Hypertherm plasma HT4400 plasma cutting accessories, Hypertherm HT4400 plasma torch parts.


 

 

 

 
 
 
Technical Support:
Safety operation procedure for plasma cutting machine
 
cutting operation and coordination of personnel protection
 
1 electric welding machine used in the site, should be equipped with waterproof, moisture-proof, hangar sunscreen, and should be equipped with the appropriate fire-fighting equipment.
 
2 high altitude welding or cutting, must fasten the safety belt, welding cutting around and below should take fire prevention measures, and should be monitored.
 
3. When the welding pressure container, sealed containers, tanks, piping, James a combustible gas and solution of the workpiece should be to eliminate the pressure vessel and piping, eliminate the combustible gas and solution, then rinse and toxic, hazardous, flammable substances; on being residual oil container should be first with steam, alkali washing, and open the cover mouth, confirming the container clean after reperfusion. Filled with water can be welded. In the container welding should be taken to prevent electric shock, poisoning and suffocation measures. Welding and cutting sealed container should be set aside stomatal and necessary in the inlet and outlet of equipment and ventilation equipment; containers lighting voltage shall not exceed 12V, welders and welding pieces of the room should be insulated; outer container should be hand care set. Is strictly prohibited in the paint has been painted and plastic containers in the welding.
 
4 pressure vessels and pipelines, electrical equipment, load bearing structure of the pressure vessel and the pressure vessel containing flammable and explosive materials are strictly prohibited for welding and cutting.
 
5 no electric welding in the open air. In the wet area operations, the operator should stand in the place covered with insulating materials, and should wear insulated shoes.
 
6 after the operation, should cut off the power supply, close the air source and water source.